RU EN
8(916) 111-4-555 office@rustrade.pro

Energy solutions that pay off

RU EN

Low Power Steam Turbines

Efficient solutions from 15 kW to 4 MW with 1.5–2 year payback period. Get economic benefits even where it was previously impossible

Applications

Low power steam turbine solutions allow using excess steam for electricity generation instead of wasteful venting through PRVs

Where Used

  • Industrial facilities with excess steam
  • Replacement of inefficient PRVs
  • Facilities with free steam raw materials
  • Sites with excess steam pressure
  • Productions with electricity demand

Installation Benefits

  • Electricity generation from "free" steam
  • Reduced purchased electricity costs
  • Useful work instead of simple pressure relief
  • Improved facility energy efficiency
  • Reduced atmospheric emissions
Low power steam turbine

Why Low Power Turbines?

Industrial facilities often have excess steam in production or steam with higher parameters than needed. Our solutions allow you to use this steam for electricity generation instead of wasting money.

The PRV Problem

A classic example is when an industrial facility uses PRVs (pressure reducing valves) to reduce steam parameters. These units reduce pressure and temperature but perform no useful work.

Installing a steam turbine in parallel with a PRV allows performing the same parameter reduction work while generating electricity from "free" steam.

Our Solution

Previously, low power steam turbine projects could not be implemented due to the high cost of Russian and European brand turbines. This made them economically unfeasible.

Our solutions significantly reduce implementation costs and provide benefits even where it was previously impossible. Payback period can be as short as 1.5–2 years.

Payback period 1.5–2 years
Power range 15 kW – 4 MW
Production faster by 1.5 times

Individual Approach

Each turbine designed to customer requirements

Precision Engineering

  • Implementation method based on precise design and engineering
  • Control stages in accordance with Russian and international standards
  • Individual solution for each customer

High-Efficiency STUs

  • Increased efficiency for maximum energy performance
  • Optimized steam balance and productivity

Full Factory Readiness

  • Delivery fully assembled on frame
  • All auxiliary equipment included
  • Significant reduction in construction and commissioning costs
  • Localized service team

Solution Flexibility

  • High-efficiency STUs — with increased efficiency for maximum output
  • Medium-efficiency STUs — optimal balance of efficiency and cost
  • Low-efficiency STUs — for facilities where steam is simply utilized or raw materials are free

Technical Specifications

Compact solutions for industrial facilities with excess steam

Compact Design

Turbines from 15 kW to 4 MW ideally suited for installation in limited spaces

Fast Payback

Investment return period of 1.5–2 years thanks to excess steam utilization

Inefficient PRV Replacement

Useful work instead of simple steam parameter reduction without energy generation

Service Support

Localized service team with spare parts stock for over 3 years

Key Advantages

Our low power turbines combine economy and reliability

Fast Payback
1.5–2 years

Fast Payback

Payback period of 1.5 to 2 years thanks to optimal cost and high efficiency solutions

Full Factory Readiness
100% ready

Full Factory Readiness

Delivery on frame with all auxiliary equipment — significant reduction in construction and commissioning costs

High Efficiency
up to 85% efficiency

High Efficiency

Ability to manufacture high-efficiency STUs with increased efficiency for maximum output

Energy Savings
up to 40% savings

Energy Savings

Using excess steam to generate electricity instead of venting to atmosphere

Wide Power Range
15 kW–4 MW

Wide Power Range

Turbines from 15 kW to 4 MW for various industrial applications

Short Production Time
×1.5 faster

Short Production Time

Production time at least 1.5 times shorter compared to Russian and European counterparts

Localized Service
3+ years stock

Localized Service

In-house service team with spare parts and materials stock for over 3 years

Custom Engineering
100% custom

Custom Engineering

Each turbine is designed for specific customer needs and parameters

Frequently Asked Questions

We've collected answers to the most common questions from our clients. If you haven't found an answer to your question — contact us.

We supply low power steam turbines ranging from 15 kW to 4 MW. This is the optimal segment for industrial facilities with excess steam or for replacing inefficient PRVs (pressure reducing valves).

Thanks to the significant economic advantage of our solutions, the payback period can be 1.5–2 years. Previously, such projects were economically unfeasible due to the high cost of Russian and European brand turbines.

Yes, this is a classic application for low power turbines. Installing a steam turbine in parallel with a PRV not only reduces steam parameters but also generates electricity, bringing significant savings to the customer.

Steam turbines can be standard design or full factory ready depending on customer needs. Full factory ready STUs significantly reduce construction and commissioning costs.

Get a Consultation

Our specialists will help you find the optimal solution for your enterprise and calculate the economic effect

All Questions & Answers

Answers to frequently asked questions about turbogenerator units, delivery times and cooperation terms

Go to FAQ
Rustrade

Energy solutions that pay off

RU EN
Home Engineering Turbines Turbogenerators Blades Oil Coolers Condensers About Cases News & Articles FAQ Cooperation Contacts
8(916) 111-4-555
Download presentation